Pull-down spout on this kitchen faucet rinses that tough food residue off your plates and self-retracts with the adjustable hose weight. Low-flow aerator conserves your water supply by reducing the flow of water without compromising water pressure.
Features:
Specs:
Pull the spout down so you can easily tackle that food caked onto your plates or rinse the sides of the sink from any angle. Toggle between the stream and spray options depending on how much pressure you need or how long that food has been sitting there. When you're done using it, the spout self-retracts with a hose weight that can be adjusted anywhere along the spray hose.
To install, use the inlet shanks and drop the new faucet and a deck plate in place of your existing faucet. Thread the mounting nuts onto the shanks so that the washers are in between the nuts and the underside of the counter. Then thread the pull-down head's hose onto the faucet's center inlet, and connect the braided hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with the etrailer.com. And today we're gonna take a look at this Phoenix Faucets Catalina RV kitchen faucet with pull down spout. This gooseneck spout faucet is going to let you upgrade the kitchen faucet in your RV or camper. And this is a three hole installation with the included deck plate and mounting hardware. So using the standard NPSM inlet shanks you're just going to drop this new faucet and deck plate in place of your existing faucet and then thread the mounting nuts onto the shanks against the underside of your counter. And then you're going to connect the pull down head hose to the hose on the faucet body.
And then finally install the hose weight that you see right here and connect the hot and cold water lines. The use of tub and tile caulk may be required depending on your installation and that is not included with this faucet. So the star of the show is this pull down head that's going to make it easy to get food off of your dishes. And we have some toggle button switches here that's going to let you choose between stream and spray options. And these rubber spray tips are going to be easy to clean.
And as I mentioned that hose weight can be adjusted anywhere along the spray hose and it enables this spout to self retract. So if you have that weight on your hose initially and it's not retracting like you wanted to or as quickly or as completely this can be easily adjusted along that hose. The low flow aerator is going to help conserve your water while you're soaping up your dishes. This has a flow rate of 1.8 gallons per minute, and as I've been showing you throughout our time together here this gooseneck spout does rotate on this oval base. So this is a dual handle design with lever style handles and quarter turn cartridge stems are going to enable the faucet to fully turn on and turn off.
And the washer-less design is going to reduce friction and daily wear for long lasting durability. This features a non-metallic ABS plastic construction with this matte finish and a spin welded celcon thermal plastic underbody. So I took some measurements earlier before our time together and I wanna begin with the overall dimensions to help you determine if this is going to work for you. Measuring the width first from handle tip to handle tip, we are sitting right at 13-1/2 inches wide. And then measuring from the countertop that this is going to be installed on to the tallest point here of our spout, we are sitting right at about 14-1/2 inches tall.
Now turning to just the dimensions of the base itself, the overall width we are sitting right at about 10-1/4 inches wide and then right at about 2-1/4 inches deep. And again, just the base itself about an inch tall from the countertop. The spout length measuring from the center of the spout all the way to the end of our aerator we're sitting at about 9-3/4 inches. And then the distance from the countertop to our aerator we're sitting right at about 6-3/4 inches. The inlet shanks, the inner diameter of those inlet shanks are half an inch and the outer diameter is 13/16 of an inch. And then the distance between these shanks, center to center is 8 inches and their length is 2 inches. Instructions are included to walk you through the very simple installation process. Obviously I don't have this connected to water but just setting it up here installing it on my little display table here it was an easy setup and that weight was very easy to get installed and adjusted as well. So this'll be a very simple, very easy installation for you. And again this matte black finish is very attractive, very stylish. You just wanna be aware that with a lot of those matte finishes, sometimes they can scuff or scratch easily and chip away that finish. So just be aware of that. I think this finish is going to be relatively durable for you, but that's always a possibility with a matte finish similar to this. Well that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Great spray faucet
Love it so far but it has only been 1 d ay.
It’s perfect.
Sofar it has been great it fits perfect ly
Exactly as advertised and super fast delivery! Great job folks!
The faucet is greater quality than I expected and arrived very fast.
we received it today and is identical to the one tamhat broke.
It's a good faucet seems to be great qu ality.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.